Should You Repair, Upgrade or Replace Your Landscape Lighting
A few lights are out. Others look dim or flicker. Maybe everything turns on, but your trees have grown and the lighting no longer looks the way it once did.
Should you repair what you have, upgrade parts of the system, or start fresh?
At Blingle Plano, we begin by understanding what is happening and what you want your lighting to accomplish. A well-built older system may have years of useful life left. A newer system may have problems that make replacement the better investment. Sometimes, moving a few fixtures is enough to make you love your lighting again.
The right recommendation starts with a conversation and a closer look.
When landscape lighting stops working
When a homeowner calls us about lights that are out, dim, or flashing, our first questions are simple: How old is the system, and how long has this been happening?
We also want to know whether the system previously worked the way it should. A problem that appeared last week gives us a different starting point than one that has persisted through years of unsuccessful repairs.
We evaluate the transformer, fixtures, connections, and electrical demands of the system. Depending on the symptoms, we may connect a new fixture temporarily to help determine whether the problem is with the existing fixture or elsewhere in the system.
Quality fixtures with long manufacturer warranties can be worth keeping. We look at their condition, including cracked housings or lenses, signs of water damage, wiring connections, and mounting hardware. For tree-mounted downlights, we also inspect how tree growth has affected the mounts and wiring.
The goal is to find the cause before asking you to invest in a solution.
When repairing an older system makes sense
One customer called us about a 12-year-old system with 22 lights. Ten were either completely out, dim, or faintly flashing, and the problems had been happening for about a year.
That might sound like a system ready for replacement. The investigation told a different story.
The transformer appeared to be functioning, and most of the working lights were closer to the beginning of the two wiring runs. We discovered that a small appliance had been added to the same electrical circuit supplying the lighting transformer. When we unplugged that appliance, seven of the troubled lights came back on. We brought in an electrician to install a dedicated circuit for the appliance.
That left three lights to investigate. One needed a replacement lamp. The other two were downlights in a single tree, where growth had begun swallowing the mounting hardware and wiring.
By testing with a temporary connection and new fixtures at the base of the tree, we isolated the remaining problems to the equipment and wiring up in the tree. We replaced that wiring and corrected the mounts. One existing fixture worked properly again; the other had failed and needed replacement.
The customer kept most of the system. We also developed a maintenance plan so the tree wiring, mounts, and lighting could be monitored going forward.
A system’s age is a reason to inspect carefully. Its condition determines what is worth saving.
When replacement is the better investment
Another property, a historic home, had a 15-year-old system made entirely of downlights. It had stopped working completely more than two years before we arrived.
We found problems throughout the installation: a transformer that needed replacement, damaged tree mounts and wiring, and fixtures with cracked lenses and housings. Most of the wiring up in the trees and most of the fixtures needed replacement anyway.
With so many major components requiring work, a complete system replacement was the practical recommendation.
Buried wiring can also affect the decision. Diagnosing an unfamiliar installation can take substantial time because we do not know where every connection is or how much wire will need to be uncovered, repaired, and reburied. We explain that uncertainty before recommending how to proceed.
Sometimes a limited repair is a reasonable first step. If the system does not respond as expected, we consider how the new components and work already completed can carry forward into a replacement.
Why a newer system may still need replacement
We also evaluated a system that was only four years old. It had fully worked for about two years, and the original installer had returned multiple times without resolving the problems.
Our evaluation revealed a combination of equipment and installation issues. The fixtures’ power demands, the distance from the transformer, and insufficient transformer capacity contributed to voltage drop. We suspected the lighting had struggled from the beginning, even before the homeowner noticed.
The fixtures themselves were also failing. They were integrated fixtures, meaning the light source was built into each fixture rather than being a separately replaceable lamp. Their short warranties had already expired.
A partial upgrade would not have delivered the lighting effects the customer wanted. The existing transformer was inadequate even for the lower-wattage options we considered, and failing fixtures still needed replacement. The problems we uncovered also gave us concerns about the existing wiring and connections.
We recommended replacing the system with equipment properly selected for the design. Once the homeowner understood what was wrong and why the previous repairs had fallen short, they chose to move forward.
A newer installation is worth evaluating just as carefully as an older one, especially when repeated repairs have not solved the problem.
When a few adjustments can improve the look
Sometimes the equipment works well, but the lighting misses the mark.
We have been called to recently installed systems where the homeowner was unhappy with the effect and had not received the follow-up service they needed. In some cases, moving a fixture farther from an object, rotating it, or moving it closer and adjusting its aim was enough to achieve the desired result.
If the fixtures are good and suitable for the job, placement and beam adjustments may be all that is needed.
Color temperature is another consideration. Warm, soft white lighting may complement a home’s materials or bring out the texture of mature tree bark. A purer white may better suit some modern architecture or particular foliage and flowers. Our designers consider the actual surfaces, colors, and overall effect you prefer.
The type of fixture determines how easily we can make that change. With a fixture that accepts a replaceable lamp, we may simply change the lamp. Some integrated fixtures have a color-temperature selector. Others require fixture replacement to achieve a different color temperature.
When your landscape calls for a new lighting design
Your landscape keeps changing after installation.
Shrubs grow taller or are trimmed differently. New planting beds change the view. Tree canopies expand beyond the reach of existing lights, and branches can block downlights that once illuminated the yard beautifully.
When several areas need attention, our certified lighting designers take a step back and walk the property with you. What do you want to see from the street? What do you enjoy looking at from inside? Which outdoor areas do you want to use after dark?
That conversation may lead to a broader redesign. It can involve a larger investment than individual adjustments, but it may still retain useful fixtures, transformers, or other components.
A new design gives us a way to consider the whole property and select the changes that will achieve the result you want.
What to expect from an evaluation
Start by talking with Brad, the owner of Blingle Plano, about what is going on. He will help determine the next step, which will usually include a walkthrough with a lighting designer.
We will discuss the symptoms, look at the system’s condition, and learn what you want from your lighting. Any applicable diagnostic charge will be explained beforehand. If you move forward with us on the recommended work, that charge is applied toward the service. If you choose not to proceed, the diagnostic charge remains payable.
We will also explain the coverage that applies to the proposed work. Existing equipment may retain manufacturer warranty coverage, while workmanship coverage depends on the work being performed. Blingle Care Plan options provide maintenance and repair coverage for a defined period, according to the plan selected.
Regular care helps preserve the appearance and performance of your lighting as the landscape changes. For more about what that involves, read our landscape lighting maintenance guide for Collin County.
Let us take a look at your landscape lighting
You do not need to know whether your system needs a repair, an upgrade, or replacement before you call. That is what we are here to help you figure out.
Talk with Brad, then let us get a friendly, personable lighting designer out to walk the property with you. You can show us what is bothering you, tell us what you wish looked different, and ask questions.
Your system may need a straightforward repair. It may benefit from a few thoughtful changes. Or it may be time for a design and installation that better serve your home, supported by ongoing maintenance.